VAF instruments 667 - 6. INSTALLATION AND FIRST USE; Unpacking and System Data Recording

8
Check if the inputs are connected correctly through menu <ALARMS> <Signals(raw)>.
In case of any errors the connection(s) or connected equipment(s) should be checked and corrected.
6.1 RECORD PEM4 + SPU3 SYSTEM DATA
This information is required when contact the supplier for any reason.
SPU3 nameplate:
Type No.
SPU3
Serial No.
Supply voltage
V
Frequency
Hz
Var.No.
Power Cons.
W
PEM4 system info:
Software
Version
Serialnumber
Hullnumber
Delivery date