VAF instruments 667 - Engine Diagram Submenu

30
Engine Diagram submenu
Figure 35 – Engine Diagram screen single screw
Figure 36 – Engine Diagram screen twin screw
The Engine Diagram displays engine load of the main engine, when a T-Sense
®
or TT-Sense
®
is
connected to the PEM4 + SPU3 system. The load limit lines of the main engine can be set in the Settings
menu. The white line can be displayed as an option and indicates a reference line which is for example
the sea trial curve of the vessel. The load limit lines make clear up to which torque and RPM level your
engine can be loaded. When the actual point (yellow dot) is passing the limit lines (red) the engine is
overloaded and can get overheated.
In case of twin screw vessels 2 actual points (Yellow dot for Starboard and yellow square for Portside)
will be shown in the same diagram.