Functions and operation
10 Operating instructions for the electronicVED exclusive electric instantaneous water heater 0020176440_00
3
3.2.7 Setting the maximum temperature (scald
protection)
a
Danger!
Risk of being scalded by hot water.
The water temperature at the draw-off
points can reach up to 60 °C.
> When using an electronicVED exclusive
electric instantaneous water heater, be
aware of the risk of scalding from high
outlet temperatures.
> Set your electronicVED exclusive to a
maximum of 43 °C if you want to be pro-
tected from scalding.
The scald protection function can only be deactivated at
the factory.
> Press the
Memo and eco buttons simultaneously to
access the
Menu.
Menu
Display settings
Scald protection
Consumption
Select language
ok
The cursor is next to the Display settings menu point.
> Press the button.
The cursor is next to the
Scald protection menu point.
> Press the
ok button.
Scald protection
max. temperature
Comfort temperature
ok
The cursor is next to the max. temperature menu point.
> Press the
ok button.
Set max. temperature
current: 42.0 °C
new 60.0 °C
-+
ok
> Press the + button to increase the temperature.
> Press the — button to decrease the temperature.
> Press the
ok button to confirm the chosen temperature.
> Press the button twice to return to the "Scald protec-
tion" menu.
The selected maximum temperature is displayed on the top
line of the water temperature display screen.
i
It is not possible to request a higher water tem-
perature than the temperature selected and con-
firmed using the
ok button. Also note that the
maximum temperature interacts with the
Com-
fort temperature
function. For example,
there is no benefit to setting a maximum tem-
perature which is the same as the comfort
temperature.
To Next Page
Loading...
