Functions and operation
Operating instructions for the electronicVED exclusive electric instantaneous water heater 0020176440_00 11
3
3.2.8 Setting/activating and deactivating the
comfort temperature (scald protection)
> Press the Memo and eco buttons simultaneously to
access the
Menu.
Menu
Display settings
Scald protection
Consumption
Select language
ok
The cursor is next to the Display settings menu point.
> Press the button.
The cursor is next to the
Scald protection menu point.
> Press the
ok button.
Scald protection
max. temperature
Comfort temperature
ok
The cursor is next to the max. temperature menu point.
> Press the button once.
Scald protection
max. temperature
Comfort temperature
ok
The cursor is next to the Comfort temperature menu
point.
> Press the
ok button.
Set comfort temperature
current: --°C
new
-- °C
-+ok
> Press the + button to increase the temperature.
> Press the — button to decrease the temperature.
> Press the
ok button to confirm the chosen temperature.
> Press the button to return to the "Scald protection"
menu.
The comfort temperature selected here can be altered by
briefly pressing the +/- key combination. If water is drawn
off within the next 30 seconds, the water will be heated to
this temperature. If no water is drawn off in this time, or if
the water stops being drawn off, the display will return to
the previous temperature setting.
To deactivate the Comfort temperature function, proceed
as follows on the
Set comfort temperature display:
> Press the — button to decrease the temperature to below
20 °C.
-- °C will then be displayed. This means that the comfort
temperature has been deactivated.
To Next Page
Loading...
