Functions and operation
12 Operating instructions for the electronicVED exclusive electric instantaneous water heater 0020176440_00
3
i
Also note that the comfort temperature inter-
acts with the
max. temperature function. For
example, there is no benefit to setting a comfort
temperature which is the same as the maximum
temperature.
3.2.9 Displaying and resetting the energy and
water consumption (Reset)
i
Note that the electronicVED exclusive is not a
calibrated measuring instrument. Due to toler-
ances in the electronic semiconductor and sen-
sors, the values displayed may deviate from the
real values.
i
The energy consumption data displayed cannot
be legally used to prepare or compare energy
consumption calculations of any kind.
> Press the
Memo and eco buttons simultaneously to
access the
Menu.
Menu
Display settings
Scald protection
Consumption
Select language
ok
The cursor is next to the Display settings menu point.
> Press the button twice.
The cursor is next to the
Consumption menu point.
> Press the
ok button.
Consumption
Energy consumption
Water consumption
ok
The cursor is next to the Energy consumption menu
point. You can display the energy consumption in kilowatt
hours or water consumption in litres for a specific period of
time (select using the or button).
> After selection, press the
ok button.
Energy consumption
since reset
the last 30 days
the last 365 days
ok
The cursor is next to the Since reset menu point. The
display screen illustrated above is an example of the
Energy consumption sub-menu. Regardless of whether
or not you wish to query the energy or water consumption,
the time cycles remain identical. You can display the energy
or water consumption data since the unit was last reset to
its factory settings (Reset), or the last month (30 days) or
the last year (365 days).
> Press the or the button to make a selection.
> Confirm this change by pressing the
ok button.
To reset the display of either the energy or water consump-
tion data to 0, proceed as follows:
> Within the
Consumption menu, select either Energy
consumption
or Water consumption.
> Press the
ok button.
The cursor is next to the
Since reset menu point.
> Press the ok button.
To Next Page
Loading...
