14 VRT 360 Operating Manual
4 Operation
water timer programme. If you want to
change the timer programme for heating
or the circulation pump, after pressing
the programming button P, select the
corresponding symbol (heating circuit or
circulation pump) and continue as shown
in the example.
Display Required steps
Press the programming
button P. The cursor (black
triangle) marks the value
which can be changed ( ),
which also flashes.
Turn the dial until you see
the tap symbol.
Press the dial. The cursor
marks the adjustable value
(H1), which also flashes.
Select the time window by
turning the dial.
Settings: H1, H2, H3
To Next Page
Loading...
