Legacy configuration codes Valid from January 2004
.
DMP248 Dewpoint Transmitter
Vaisala DRYCAP
®
Dewpoint Transmitter
DMP248
PRICE
Display no display A
display on transmitter cover B
Pr
obe cable length 2 m cable 1
5 m cable 2
10 m cable
Alarm relay outputs no A
yes *) B
Power supply 24 VAC/VDC
module
115 VAC *) 1
230 VAC *) 2
Serial interface RS 232C A
RS 485/RS 422
digital current loop C
Sensor protection sintered stainless steel filter (16452 ) 1
stainless steel filter for vacuum (HM46999) 2
Analog output signals 4...20 mA A
hannel 2
Units (local display metric
and serial interface) non-metric
-40...+20 °C) (-40...+68 °F) A
-40...+60 °C) (-40...+140 °F) B B
(Ch1 and Ch2) Td
-60...+20 °C) (-76...+68 °F) C C
Td
-50...+100 °C) (-58...+212 °F) D D
Td
-50...+50 °C) (-58...+122 °F)
0...+60 °C) (+32...+140 °F) L
-40...+80 °C) (-40...+176 °F)
0...+100 °C) (+32...+212 °F) N N
RH
0...100%RH) R R
Special: Define quantity for CH1: CH2:
X
Define scale for CH1: CH2:
hannel 2
Probe installation ISO R1/2 thread adapter with leak screw
1
accessories
NPT 1/2 thread adapter (no leak screw)
5
ISO R1/2 with leak screw + ISO R1/2 to NPT 1/2 adapter
Ball valve set DMP248BVS (with ISO R1/2 thread adapter)
Sampling cell DMP248SC (with ISO R1/2 thread adapter)
Duct installation flange DM240FA (with ISO R1/2 thread adapter)
English manual B
German manual C
French manual D
Japanese manual J
*) NOTE! Simultaneus installation of both alarm output and 115/230 VAC
OTAL
power supply module in the same transmitter is not possible.
TY
TOTAL VALUE
Selections in bold are included in the prices of the basic versions.
Selections in italic are available at an extra price.
Example of order code with typical settings:
DMP248 B