Need help?Do you have a question about the Vaisala HUMICAP HMT120 Series and is the answer not in the manual?
General| Humidity Measurement Range | 0 ... 100 %RH |
|---|---|
| Enclosure Rating | IP65 |
| Measurement Parameters | Relative humidity and temperature |
| Temperature Measurement Range | -40 to +60 °C |
| Operating Temperature | -40 ... +60 °C (-40 ... +140 °F) |
| Storage Temperature | -40...+80°C |
| Response Time | 15 s (humidity, 90% of step change at +25°C, 1 m/s airflow) |
| Sensor Type | Vaisala HUMICAP® 180R |
| Temperature Accuracy | ±0.2 °C |
| Output Signals | Analog output, Modbus RTU, RS-232 |
Provides dimensions for wall mounting the transmitter.
Shows the electrical connections for the transmitter.
Details how to perform an analog output test.
Details steps for adjusting humidity settings using push buttons.
Details steps for adjusting temperature settings using push buttons.
To Next Page
