Need help?Do you have a question about the Vaisala hmdw110 series and is the answer not in the manual?
General| Humidity Measurement Range | 0 ... 100 %RH |
|---|---|
| Protection Class | IP65 |
| Measurement Parameters | Relative humidity, Temperature |
| Temperature Measurement Range | -40...+60°C |
| Response Time | 15 s (humidity) |
| Humidity Sensor | Vaisala HUMICAP® |
| Operating Temperature | -40...+60°C |
Details critical safety precautions and warnings for operating the HMDW110 series transmitters.
Step-by-step instructions for installing HMD110/112 series transmitters, including tools and procedures.
Step-by-step instructions for installing HMW110/112 series transmitters, including tools and procedures.
Step-by-step instructions for installing HMS110/112 series transmitters, including tools and procedures.
Details how to connect the humidity and temperature measurement current loops for HMDW110.
Shows how to connect the HMDW110 transmitter to the RDP100 display panel for data and power.
Lists and describes available serial commands for interacting with the transmitter via the service port.
Explains commands for setting and monitoring analog output error levels and overrange behavior.
Introduces commands for performing humidity and temperature calibration and adjustments.
Step-by-step guide for calibration using a hand-held meter and reference probe.
Detailed procedure for one-point humidity calibration using specific equipment.
Procedure for two-point humidity calibration via computer and calibrator.
Guide for two-point temperature calibration using a computer and references.
Lists common error messages, their possible causes, and suggested solutions for the transmitter.
Details the performance specifications of the HMDW110 series, including accuracy and measurement ranges.
To Next Page
