Vaisala HM45 User Manual

51
7. Select menu item
[4] Point 2
and
press the
Set
button. The meter
now shows the currently
measured value of the selected
parameter. Set the reference value
using the arrow buttons and press
the
OK
button.
The correction to the
measurement at point 2 is now
shown in the text for the menu
item [4].
8. Select menu item
[5] Note
to edit
the calibration info text that is
stored in the probe. Edit the text
using the select button and arrow
keys. When done, select the OK
character in the bottom right
corner to save the changed text.
To exit without saving, press the
Cancel
button.

Vaisala HM45 Specifications

General

Brand	Vaisala
Model	HM45
Category	Measuring Instruments
Language	English