Document code Date Description
M211060EN-G January 2016 • Added Modbus protocol.
• Updated instructions for switching the probe to serial mode
from analog or Modbus mode.
• Updated relative humidity factory calibration uncertainty
specification.
• Added information about using HMP110 with an MI70
indicator when in analog mode.
• Added instructions for entering calibration information with
the CDATE and CTEXT commands.
1.2 Related manuals
Table 2 Related manuals
Document code Name
M211059EN Vaisala Humidity and Temperature Probes HMP60 and HMP110 Series Multilingual
Quick Guide
M210297EN Vaisala Handheld Humidity and Temperature Meter HM70 User Guide
M211080EN Vaisala Mounting Flange for Humidity Probes Quick Reference Guide
M211106EN Vaisala Loop Power Converter Quick Reference Guide
1.3 Documentation conventions
Warning alerts you to a serious hazard. If you do not read and
follow instructions carefully at this point, there is a risk of injury or even death.
WARNING!
Caution warns you of a potential hazard. If you do not read and
follow instructions carefully at this point, the product could be damaged or
important data could be lost.
CAUTION!
Note highlights important information on using the product.
HMP60 and HMP110 Series User Guide M211060EN-J
8
To Next Page
Loading...
Need help?
General
