5. Vaisala Insight software
Vaisala Insight PC software is a configuration software for Indigo compatible probes. The
supported operating systems are Windows 7 (64-bit), Windows 8.1 (64-bit), and Windows 10
(64-bit).
With the Insight software, you can:
• See device information and status.
• See real-time measurement data.
• Configure serial communication settings, filtering factor, and analog output parameters
and scaling.
• Calibrate and adjust the device.
Download Vaisala Insight software at www.vaisala.com/insight.
The probe can be connected to Vaisala Insight software using a Vaisala USB cable (item code
219690).
HMP60 and HMP110 probes support Insight from probe software version 2.1.4
onwards.
5.1 Connecting to Insight software
• Computer with Microsoft Windowsâ operating system and Vaisala Insight
software installed
• USB connection cable (item code 219690)
When connecting several devices at the same time, note that your
computer may not be able to supply enough power through its USB ports. Use
an externally powered USB hub that can supply >2 W for each port.
CAUTION!
Figure 17 Connecting probe to Insight
Chapter 5 – Vaisala Insight software
31
To Next Page
Loading...
