EasyManua.ls Logo

Vaisala HydroMet - Troubleshooting Common Issues; Troubleshooting Procedure Guide

Vaisala HydroMet
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 3 _______________________________________________________ AWS Client Software
VAISALA______________________________________________________________________ 109
warnings warnings [clear]. To see active warnings, type warnings. To clear active
warnings, type warnings clear. Warnings indicate that there are some
problems in the software. See Chapter 4, Troubleshooting, on page 111 for
more information.
winddircal0 winddircal0 [direction]. Set the direction in degrees to align the wind vane.
Type, for example, winddircal0 360 (north).
zr Zmodem receive command is needed when transferring the setup file to the
QML logger.
zs zs <file_name>. Sends a file from the QML logger using Zmodem protocol
(used instead of AWS Client function).
NOTE
The following commands allow the use of wild cards: chmod, dir, del,
copy, move, verify, and zs.
Example:
copy /log/L2*.* /Ext/log_L2copy
NOTE
File commands (dir, del, copy, move, and verify) can be aborted by
typing CTRL+C.
Table 22 Command Set (Continued)
Command Description

Table of Contents