User's Guide ______________________________________________________________________
86 ___________________________________________________________________M210784EN-E
is set negative with Lizard Setup Software, the old log files will not be
deleted automatically.
The approximate maximum logging period for a setup where 10
measured values are logged is shown in Table 15 on page 86.
Log Data Format
A log entry is generated at the time defined in the setup file. When
entries are retrieved with the logshow command, the produced output
includes two parts: the header and the log entry information.
In Figure 46 on page 86, the example of a log query shows 10 entries of
logged items 1 and 2 starting at midnight on February 27, 2008.
0802-153
Figure 46 Output of Logshow Command
The header information shows the variable name
(WindSim:outputVar1 and WindSim:outputVar2).
Table 15 Log Memory Capacity
Logging Interval Maximum Logging Period
1 second 5 hours
10 seconds Over 2 days
1 minute 2 weeks
10 minutes Over 4 months
1 hour Almost 2 years
To Next Page
Loading...