__________________________________________________________________________ English
ENGLISH
Overview
This Quick Reference Guide contains information that is needed to install
WMT700 with the FIX70 mounting kit.
Download the complete User's Guide from
www.vaisala.com/wmt700.
Unpacking Instructions
When unpacking the wind sensor, remove the transportation damper that
protects the sensor body. To avoid bending or twisting the array, do not remove
the damper protecting the array until you have installed WMT700. The figure
below shows the damper protecting the array.
NOTE
Remove the transportation damper for the array before you switch on the
power supply.
CAUTION
When handling WMT700, do not rotate, pull, strike, bend, scrape, or
touch the transducers with sharp objects. Any impact on the wind sensor
array damages the device.
VAISALA
________________________________________________________________________ 3
To Next Page
Loading...
Need help?
General
