Valcom V-2928 User Manual

18
SETUP OF THE V-2924A MODEM
1. To transfer data from a PC through a modem to the V-2924A System, the Remote Modem must be setup.
THIS IS A "ONE-TIME" PROCEDURE THAT SHOULD BE PERFORMED WHEN THE MODEM IS
INSTALLED. Select Communications Setup from the File Menu as shown in the following screen display:
2. Select Remote Modem Setup and the following screen is displayed:
3. If Yes is selected, the dip switches at the back of the modem must be set to the positions shown below.
Press OK to continue.

Valcom V-2928 Specifications

General

Brand	Valcom
Model	V-2928
Category	Intercom System
Language	English