Valet System One Installation Instructions

30
CHANGING THE CHIME
The chime melody can be changed to any one of nine options by means of the two
programming switches (SEL & PROG) situated on the door station circuit board as
Indicated below.
POS
NEG
COM1
COM2
TC
VLC
SHLD
CH
VR3
VR2
VR1
SEL
PROG
U5
SEL
PROG
Procedure
Press the Program button (PROG) – The red LED illuminates and the current chime plays.
Press the Select button (SEL) – The next chime option plays.
Repeatedly press the Select button until the desired melody is heard.
Press the Program button to lock in selection – The red LED flashes.
Press the Program button again to exit program mode – The red LED extinguishes.
NOTE: Pressing the Select button after all 9 chime options have been sampled,
will result in returning to the first chime option.

Valet System One Specifications

General

Brand	Valet
Model	System One
Category	Intercom System
Language	English