To Next PageTo Next Page
Need help?Do you have a question about the Valeton GP-200LT and is the answer not in the manual?
Audio Specifications| A/D/A Converter | 24-bit |
|---|---|
| Sampling Frequency | 44.1 kHz |
| SNR | 110dB |
Memory and Looping| Patch Memory | 256 Patch slots, 100 Factory Patches |
|---|---|
| Looper Record Time | 180 seconds |
| Drum Machine Patterns | 100 Patterns |
Analog Input Connections| Guitar Input | 1/4″ Unbalanced (TS) |
|---|---|
| Input Impedance | 4.7MΩ (A.GT), 1MΩ (E.GT), 10kΩ (Line) |
| Return Input | 1/4″ Unbalanced (TS) |
Analog Output Connections| L/R Unbalanced Outputs | 1/4″ TS jacks, impedance: 1kΩ |
|---|---|
| L/R Balanced Outputs | 1/4” TRS jacks, impedance: 1kΩ |
| Headphone Output | 1/8″ Stereo (TRS), impedance: 22Ω |
Digital Connections| MIDI Connectors | 1/8” TRS MIDI connectors |
|---|---|
| USB Port | USB 2.0 Type-C Port |
| Sample Rate | 44.1 kHz |
Power| Power Requirements | DC 9V |
|---|---|
| Current | 1000mA |
| Center Negative | Yes |
Weight and Dimensions| Dimensions | 253mm(W) x 165mm(D) x 56mm(H) |
|---|---|
| Unit Weight | 1.25 kg |
| Depth | Supports 16-bit or 24-bit |
Guidelines for safe operation and preventing damage.
Instructions for connecting power and audio cables.
Recommendations for maintaining the unit.
Warnings against unauthorized modifications to the unit.
Proper AC adapter use and safety precautions.
Steps to take when the unit experiences a malfunction.
Description of the 4.3" color LCD screen and its functions.
Details on MASTER, PHONES, PARA knobs and various control buttons.
Explanation of the 4 footswitches and Quick Access Knobs for control.
Steps for connecting the GP-200LT to your gear and power.
How to activate and use the built-in tuner.
Overview of the main interface and its displayed information.
Detailed explanation of the tuner function and its controls.
How to use the looper, including recording, playback, and tempo sync.
Using the built-in drum machine with patterns, tempo, and volume controls.
Using the GP-200LT to control external MIDI devices and DAW plugins.
Connecting and utilizing external expression pedals for real-time parameter control.
How to access and edit individual effect modules within a patch.
Procedures for reordering and managing effect modules in the signal chain.
Configuring patch-specific settings like volume, tempo, and expression pedals.
Saving changes to patches, renaming, and managing patch slots.
Adjusting input and output parameters like impedance and levels.
Settings for using the GP-200LT as a USB audio interface for recording.
Customizing footswitch modes and functions for various operations.
Process for calibrating external expression pedals for optimal performance.
Configuring MIDI input/output channels and clock sources for external control.
Adjusting display settings and managing AMP/CAB module correlation.
Controlling the global equalizer to shape the overall tone.
Checking firmware version and performing a factory reset of the device.
Recommended connections for audio interfaces, studio monitors, and PA systems.
Various connection methods for using the GP-200LT with guitar amplifiers.
Implementing the 4-cable method and integrating with other effects pedals.
Using the GP-200LT as an audio interface for computers and mobile devices.
Detailed descriptions and parameters for PRE effect modules.
Descriptions and parameters for WAH and DST effect modules.
Details on the various amplifier models and their tone controls.
Descriptions and parameters for Noise Reduction and Cabinet simulation effects.
Details on Equalizer and Modulation effects and their controls.
Descriptions and parameters for Delay effects.
Details on Reverb and Volume effects.
Steps to take if the unit fails to power on.
Troubleshooting steps for audio output issues.
Identifying and resolving unwanted noise in the audio signal.
General advice for resolving audio signal problems.
Solutions for problems related to external expression pedals.
