Valeton CP-200 User Manual

User Manual
For Firmware V1.0.4
※ In the interest of product improvement, the specifications and/or the content of products (including but not limited to appearances, packaging design, manual content, accessories, size, parameters and display
screen), are subject to change without prior notice. Please check with local supplier for exact oers. Specifications and features (including but not limited to appearances, colors and size) may vary by model owing to
environmental factors, and all images are illustrative.

Valeton CP-200 Specifications

Audio Specifications

A/D/A Converter	24-bit high performance audio
Sampling Frequency	44.1 kHz
Signal-to-Noise Ratio (SNR)	110 dB

Memory and Recording

Patch Memory	256 Patch slots, 100 Factory Patches
Looper Record Time	180 seconds
Drum Machine Patterns	100 Patterns

Connections

MIDI Connectors	5-pin MIDI (IN/OUT/THRU)
USB Port	USB 2.0 Type-C
Guitar Input	1/4″ Unbalanced (TS)

Analog Input Specifications

Input Impedance (A.GT)	1M Ohms
Input Impedance (E.GT)	4.7M Ohms
Input Impedance (Line)	10k Ohms

Analog Output Specifications

L/R Unbalanced Output Impedance	1k Ohms
L/R Balanced Outputs	XLR jacks
Headphone Output Impedance	22 Ohms

USB Recording Specification

USB Sample Rate	44.1 kHz
USB Bit Depth	Supports 16-bit or 24-bit
USB Port	USB 2.0 Type-C

Size and Weight

Dimensions	345mm(W) x 220mm(D) x 62.5mm(H)
Unit Weight	2.37 kg
Power Requirements	DC 9V, 1000mA