Valeton CP-200 - Expression Pedal Calibration

Display Auto CAB Match
GLOBALSETTINGS
USB Audio
EXP Calibrate
Footswitch
Input/Output
EXP 2/Footswitch
EXP 1 EXP 2
EXP Calibrate
The EXP Calibrate helps you calibrate your expression
pedal. It is important to do so if you find the sweep has very
little or too much change in the eect you’ve set.
12
Footswitch functions include:
Functions
Description
Bank
Enter bank selecting menu
Bank+
Load the latter adjacent bank
Bank-
Load the former adjacent bank
Patch+
Load the latter adjacent patch
Patch-
Load the former adjacent patch
A
Load the A patch
B
Load the B patch
C
Load the C patch
D
Load the D patch
LOOPER
Enter the Looper
Functions
Description
DRUM
Play/stop the drum
Drum Patch+
Load the latter adjacent drum patch
Drum Patch-
Load the former adjacent drum patch
TUNER
Enter the tuner
CTRL 1
Execute CTRL 1’s function
CTRL 2
Execute CTRL 2’s function
CTRL 3
Execute CTRL 3’s function
CTRL 4
Execute CTRL 4’s function
Tap Tempo
Use Tap Tempo
As shown, turn Quick Access Knob 1 or 2 to calibrate EXP
pedal 1 or 2.
Lift your pedal all the way up, and click PARA to continue. Press the pedal all the way down, and click PARA to continue.
Press the front side strongly, and click PARA to continue. If successfully calibrated, the screen will display as so.
If not, the screen will display as so. Please try to repeat the
process.You can also click BACK to return to the previous
menu.
EXP Calibrate
Lift the pedal
fully up towards heel.
Press PARA to continue.
EXP Calibrate
Lift the pedal
fully down towards toe.
Press PARA to continue.
EXP Calibrate
Press PARA to continue.
Press strongly.
EXP Calibrate
Press PARA to continue.
Complete!
Press PARA to continue.
Failed!
EXP Calibrate
Global Settings