Ÿ Brightness: For adjusting screen brightness
Ÿ Display Time: The time GP-200 needs to enter sleep
mode.
Ÿ Language: For choosing your system language.
Brightness
50
DisplayTime
Always
Language
English
EXP 2/ Footswitch
Display
Global EQ
Factory Reset
Auto CAB Match
About
GLOBAL SETTING
ON/OFF
ON
EXP 2/ Footswitch
Display
Global EQ
Factory Reset
Auto CAB Match
About
GLOBAL SETTING
PressPARAtoenter.
EXP 2/ Footswitch
Display
Global EQ
Factory Reset
Auto CAB Match
About
GLOBAL SETTING
Global EQ
Band 4 Freq Band 4 Q Band 4 Gain
Adjust the master volume of the global equalizer
OFF~20Hz~20000Hz
(Default: OFF)
High pass filter to cut o low frequency signals.
Band 1-4: 4 selectable
peak filters used for
overall or detailed
frequency adjustment in
the certain range,
including 3 available
parameters: Frequency,
Q and Gain.
20Hz~20000Hz
(Band 1-4’s default frequencies
are accordingly 100Hz, 500Hz,
1000Hz and 5000Hz)
To adjust the corresponding filter’s frequency.
Width. To adjust the width of the formant (slope of the
filter), the larger the number, the steeper the slope.
-20dB ~ +20dB
(Default: 0dB)
20Hz~20000Hz~OFF
(Default: 20000Hz)
Low pass filter to cut o high frequency signals.
14
Display
This menu is to adjust parameters and settings of the
displayed factors.
Auto CAB Match
This is to turn on/o the correlation status of the AMP
module and the CAB module.
Ÿ When turned ON, the eects in the CAB module will
correspondingly change with the eects in the AMP
module.
Global EQ
This menu is to control the global equalizer of the GP-200 in order to change the overall tone feel.
This is the displayed menu:
Global EQ contains Low Cut / High Cut, and 4 bands of parametric EQ. Every frequency band can be freely turned
on/o based on your needs. There are total 8 of them.
Global Settings
To Next Page
Loading...