EasyManuals Logo

Valeton CP-200 User Manual

Valeton CP-200
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Welcome
Ÿ Thank you for purchasing a VALETON product.
Ÿ We know it might be tedious but please read this manual carefully to get the most out of your GP-200.
Ÿ Please keep this manual for future reference.
Handling
Ÿ Do not get the unit wet. If liquid is spilled on the unit, shut it o immediately.
Ÿ Do not block any of the ventilation openings.
Ÿ Keep away from heat sources.
Ÿ Disconnect the unit during storms to prevent damage.
Ÿ Operation of this unit within significant electromagnetic fields should be avoided.
Connecting the power and input/output jacks
Ÿ Always turn OFF the power to the unit and all other equipment before connecting or disconnecting any cables. Also
make sure to disconnect all connection cables and the AC adapter before moving the unit.
Cleaning
Ÿ Clean only with a dry cloth.
Alterations
Ÿ Do not open the unit.
Ÿ Do not attempt to service the unit yourself.
Ÿ Operation of this unit within significant electromagnetic fields should be avoided.
AC Adapter Operation
Ÿ Always use a DC9V center negative 1000mA AC adapter. Use of an adapter other than that specified could damage
the unit or cause malfunction and pose a safety hazard. Always connect the AC adapter to an AC outlet that supplies
the rated voltage required by the adapter.
Ÿ Unplug the unit during lightning storms or when unused for long periods of time.
Malfunction
Ÿ If the unit should malfunction, disconnect the AC adapter and turn the power OFF immediately. Then, disconnect all
other connected cables.
Ÿ Prepare information including the model name, serial number, specific symptoms related to the malfunction, your
name, address and telephone number and contact the store where you bought the unit, or contact VALETON
support( )service@valeton.net
Attention
1
Thank you for choosing a VALETON product!

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Valeton CP-200 and is the answer not in the manual?

Valeton CP-200 Specifications

Audio Specifications IconAudio Specifications
A/D/A Converter24-bit high performance audio
Sampling Frequency44.1 kHz
Signal-to-Noise Ratio (SNR)110 dB
Memory and Recording IconMemory and Recording
Patch Memory256 Patch slots, 100 Factory Patches
Looper Record Time180 seconds
Drum Machine Patterns100 Patterns
Connections IconConnections
MIDI Connectors5-pin MIDI (IN/OUT/THRU)
USB PortUSB 2.0 Type-C
Guitar Input1/4″ Unbalanced (TS)
Analog Input Specifications IconAnalog Input Specifications
Input Impedance (A.GT)1M Ohms
Input Impedance (E.GT)4.7M Ohms
Input Impedance (Line)10k Ohms
Analog Output Specifications IconAnalog Output Specifications
L/R Unbalanced Output Impedance1k Ohms
L/R Balanced OutputsXLR jacks
Headphone Output Impedance22 Ohms
USB Recording Specification IconUSB Recording Specification
USB Sample Rate44.1 kHz
USB Bit DepthSupports 16-bit or 24-bit
USB PortUSB 2.0 Type-C
Size and Weight IconSize and Weight
Dimensions345mm(W) x 220mm(D) x 62.5mm(H)
Unit Weight2.37 kg
Power RequirementsDC 9V, 1000mA

Related product manuals