Valeton CP-200 User Manual

Contents
Welcome·············································1
Attention············································1
Overview············································2
Panel Introduction·······························3
Getting Started···································4
Screen Introduction·····························5
Main Display Screen·································5
TUNER·························································5
LOOPER······················································6
DRUM··························································6
EXP Pedal·················································7
Patch Setting·······································7
Edit Menu·········································7
Editing a Module·······································7
Managing the Signal Chain······················8
Patch Settings···········································8
Save Menu··················································9
Global Settings··································9
Input/Output············································10
USB Audio·················································10
Footswitch················································11
EXP Calibrate··········································12
EXP 2/Footswitch··································13
MIDI···························································13
Display······················································14
Auto CAB Match······································14
Global EQ···················································14
About·························································15
Factory Reset···········································15
Compatible software·························16
Application Scenarios·······················17
With full-range speaker devices············17
With guitar amps (INPUT jack)················17
With guitar amps (using FX Loop to pre-
position the GP-200)··································18
With guitar amps (using FX Loop to post-
position the GP-200)··································18
With guitar amps (using FX Loop to run
the 4 cable method)····································19
Audio Studio (for livestreaming)···········19
EFFECT LIST·····································20
PRE···························································20
WAH··························································23
DST···························································23
AMP··························································27
NR····························································36
CAB··························································37
EQ·····························································39
MOD·························································39
DLY··························································42
RVB··························································44
VOL··························································44
Drum Rhythm List··························45
MIDI Control Information List···········48
Troubleshooting····························50
Technical Specifications··················51

Valeton CP-200 Specifications

Audio Specifications

A/D/A Converter	24-bit high performance audio
Sampling Frequency	44.1 kHz
Signal-to-Noise Ratio (SNR)	110 dB

Memory and Recording

Patch Memory	256 Patch slots, 100 Factory Patches
Looper Record Time	180 seconds
Drum Machine Patterns	100 Patterns

Connections

MIDI Connectors	5-pin MIDI (IN/OUT/THRU)
USB Port	USB 2.0 Type-C
Guitar Input	1/4″ Unbalanced (TS)

Analog Input Specifications

Input Impedance (A.GT)	1M Ohms
Input Impedance (E.GT)	4.7M Ohms
Input Impedance (Line)	10k Ohms

Analog Output Specifications

L/R Unbalanced Output Impedance	1k Ohms
L/R Balanced Outputs	XLR jacks
Headphone Output Impedance	22 Ohms

USB Recording Specification

USB Sample Rate	44.1 kHz
USB Bit Depth	Supports 16-bit or 24-bit
USB Port	USB 2.0 Type-C

Size and Weight

Dimensions	345mm(W) x 220mm(D) x 62.5mm(H)
Unit Weight	2.37 kg
Power Requirements	DC 9V, 1000mA