Valeton GP-200LT - Global EQ Settings

PressPARAtoenter.
EXP 2/ Footswitch
Display
Global EQ
Factory Reset
Auto CAB Match
About
GLOBALSETTINGS
Global EQ
Band 4 Freq Band 4 Q Band 4 Gain
Parameter
Range
Description
ON/OFF
ON/OFF
On/O global EQ
Level
0~100(Default:50)
Adjust the master volume of the global equalizer
Low Cut
OFF~20Hz~20000Hz
(Default: OFF)
High pass filter to cut o low frequency signals.
Band 1-4: 4 selectable
peak filters used for
overall or detailed
frequency adjustment in
the certain range,
including 3 available
parameters: Frequency,
Q and Gain.
Band 1-4
Frequency
20Hz~20000Hz
(Band 1-4’s default frequencies
are accordingly 100Hz, 500Hz,
1000Hz and 5000Hz)
To adjust the corresponding filter’s frequency.
Band 1-4 Q
0.1~10.0
(Default: 0.71)
Width. To adjust the width of the formant (slope of the
filter), the larger the number, the steeper the slope.
Band 1-4
Gain
-20dB ~ +20dB
(Default: 0dB)
Adjust the filter gain
High Cut
20Hz~20000Hz~OFF
(Default: 20000Hz)
Low pass filter to cut o high frequency signals.
Global EQ
This menu is to control the global equalizer of the GP-200LT in order to change the overall tone feel.
This is the displayed menu:
Global EQ contains Low Cut / High Cut, and 4 bands of parametric EQ. Every frequency band can be freely turned
on/o based on your needs. There are total 6 of them.
Global Settings
Note:
Ÿ Please stay cautious when adjusting your global EQ to protect your hearing and device
Ÿ Global EQ won’t aect the USB audio output of the GP-200LT
Ÿ When a patch is using too many modules, or some modules are consumed with too much system resources
(such as reverb eect), the system may be overloaded after applying global EQ.
16