35
Troubleshooting
Use this section with the machine owner's manual to diagnose and troubleshoot problems with the machine
and/or control panel. Keep in mind the following precautions:
• Always perform service or maintenance safely.
• Use personal protection equipment when required.
• Maintain a minimum working clearance around the control panel and other equipment.
• Use fall protection when required.
• Always use at least the minimal lockout/tagout procedure when maintaining or servicing the machine.
!
• TO REDUCE THE POSSIBILITY OF SEVERE INJURY OR DEATH:
• TROUBLESHOOTING OR REPAIRING ELECTRICAL PROBLEMS SHOULD ONLY BE PERFORMED
BY A QUALIFIED VALLEY DEALER.
• ALWAYS CONTACT YOUR LOCAL VALLEY DEALER TO TROUBLESHOOT OR CORRECT ANY ELEC-
TRICAL PROBLEMS ON OR ASSOCIATED WITH THE CONTROL PANEL OR MACHINE. NEVER AT-
TEMPT TO TROUBLESHOOT OR CORRECT ELECTRICAL PROBLEMS ON YOUR OWN.
• USE PERSONAL PROTECTION EQUIPMENT WHEN REQUIRED.
• MAINTAIN A MINIMUM WORKING DISTANCE AROUND THE CONTROL PANEL AND OTHER EQUIP-
MENT.
• USE FALL PROTECTION WHEN REQUIRED.
• BEFORE SERVICING OR PERFORMING MAINTENANCE ON THE MACHINE, ALWAYS SHUT OFF
ALL ELECTRICAL POWER TO THE CONTROL PANEL AND MACHINE, THEN USE THE MINIMAL
LOCKOUT/TAGOUT PROCEDURE ON THE SERVICE DISCONNECT AND CONTROL PANEL.
For more information see the Safety section.
To Next Page
Loading...