78
1. First carefully read the text and then press
the confirm button
. The message
disappears until the first re-connected of the
machine at electrical supply.
2. First carefully read the text and then press
the RESET button . The
message permanently disappears.
It is necessary to keep record on the working hours of the mixer scrapers
(appendix A)!
It this way the user knows when mixer scrapers should be replaced.
It is strictly forbidden to put plastic parts (such as mixer scrapers) of the
appliance into the dishwasher to clean them!
14.6 REPLACING THE MIXER SCRAPERS AND SLIDERS
At each change of scrapers is also necessary to replace the sliders!
At any change you must change all scrapers and all sliders (never only one or
two,...).
The mixer scrapers and sliders replacing process:
make sure that the preparation and making control panels are in the
STOP position;
make sure that the production cylinder is empty;
turn off the SAFETY SWITCH and the MAIN SWITCH;
open the door;
slowly and carefully with both hands pull the mixer out of the cylinder;
exercise great care to prevent accidental dropping and consequent
damaging of the mixer:
To Next Page
Loading...
Need help?
General