1
4008896-03
© Copyright Miles Industries Ltd., 2022
INSTALLER
Leave this manual
with the appliance.
CONSUMER
Retain this manual
for future reference.
The 1130CIK Clean Installation Kit installs at the time of
framing the appliance BEFORE installing the wall fi nish.
Non-combustible wall finishes are required and
are applied over top of fl anges and butted up to 1130’s
frame—see appliance installation manual for more
information about fi nishing around this kit.
This kit is not intended to and cannot be installed
with any other trim.
Overview
H5 1100M
Top panel
Left hand panel
Right hand
panel
Lower panel
Right hand
door
Left hand
door
Removable panel
Barrier screen
Upper finishing
strip
39-1/2” [1004 mm]
33-5/8” [854 mm]
25-3/8” [645 mm]
36” [915 mm]
1-5/8” [42 mm]
%RWWRPRIWULPȵXVKZLWKERWWRPRIDSSOLDQFH
$LUJDS
DWWRSRI
%DUULHU
VFUHHQ
Frame
depth
1-1/4”
[32 mm]
Upper Finishing
Strip depth
1-3/4” [45 mm]
This kit must be installed by a
qualified installer, service agency
or gas supplier at the time of
the heater installation. These
instructions are to be used in
conjunction with the fireplace
main installation instructions.
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and must be
installed for the protection of children and other at-risk
individuals.
1130CIK Clean Installation Kit
CSA approved for use with Valor H5 1100M models ONLY
INSTALLATION MANUAL
H5 Series
To Next Page
Need help?
General
