Valor Madrona User Manual

4006571-02
MFCS05 Madrona Modern Stove Casing
CSA approved for use with Valor Models MF28 Heaters ONLY
Notes: This kit must be installed or serviced by a qualifi ed install-
er, service agency or gas supplier. These instructions are to be
used in conjunction with the main installation instructions
for the above listed heater models.
The application of this kit does not aff ect the venting capa-
bilities or method of preparation of the MF28 heater as de-
scribed in the MF28 heater installation manual.
To complete the installation
of this kit you need the
following items:
• MF28 Madrona Engine
• MFCS05 Madrona Modern
Stove
MFCS05—Madrona Modern
Stove Casing, including
Barrier Screen
MF28—Madrona Engine
Complete Stove
© Copyright Miles Industries Ltd., 2018.
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
INSTALLER
Leave this manual
with the appliance.
CONSUMER
Retain this manual
for future reference.
INSTALLATION MANUAL
Madrona
Overview
(MF28 sold separately)

Valor Madrona Specifications

General

Brand	Valor
Model	Madrona
Category	Fireplace Accessories
Language	English

Summary

Basic Installation Sequence

Tips

Advice for handling components and preparing the appliance for installation.

Kits Contents

Dimensions & Clearances to Combustibles

Casting Tolerances

Explains expected variations in cast iron and concrete parts for dimensional consistency.

Floor Requirements

Specifies floor preparation for installation on carpeting, tile, or other combustible materials.

Mobile Home Floor Fixing

Instructions for securing the stove to the floor when used in a mobile home.

Mantel Requirements

Guidance on installing mantels, including clearances and material considerations.

Installation Steps

Front Engine Brackets

Attaching the engine brackets to the stove casing side panels.

Rear Stove Panel

Attaching the rear panel of the stove casing to the engine.

Right Side Stove Panel

Installing the right side panel and securing the engine.

Left Side Stove Panel

Installing the left side panel and securing the engine.

Top Panel and Vent Collar

Installing the top cast panel and the vent collar or cast cover.

Inlay Panels and Access Door

Installing inlay panels and the access door to the stove assembly.

Cast Front and Barrier Screen

Attaching the cast front with barrier screen and finishing engine setup.

Maintenance

Repair Parts List