204 Heavy Duty Combination Brake Lathe
STANDARD & OPTIONAL EQUIPMENT
STANDARD MACHINES
204C Disc/Drum Lathe with Powered & Manual Cross-Feed Slides, Base and Standard
Equipment
Part No. Description
804-2474-01 115V, 60 Hz, 1 Ph
804-2474-05 230V, 60 Hz, 1 Ph
804-8651-44 230V, 50 Hz, 1 Ph
STANDARD EQUIPMENT
804-8690-56 Twin Cutter Assembly
804-8671-10 Tool Bar for Drums
804-3021-71 Tool Bit Holder for Drums
804-8665-63 Carbide Bit Package
Rotor Bits, 4 (3 cutting edges)
Drum Bits, 2 (2 cutting edges)
Arbor Components
804-2040-42 1" Arbor w/Nut & Washer (25.4 mm)
000-1806-70 Spring
109-1032-09 Spacer, 1" (25.4 mm)
109-1033-06 Spacer, 2" (50.8 mm)
804-2040-44 Draw Bar
804-8658-22 Double Ended Cone Set for 1" Arbor
804-8658-23 Cone, 1.32" x 1.67" (33.53 x 42.42mm)
804-8658-24 Cone, 1.36" x 1.71" (34.54 x 43.43mm)
804-8658-25 Cone, 1.71" x 2.07" (43.43 x 52.59mm)
804-8658-26 Cone, 2.07" x 2.44" (52.59 x 61.98mm)
804-8658-27 Cone, 2.44" x 2.89" (61.98 x 73.41mm)
804-8664-64 Tapered Cone Set for 1" Arbor
804-8664-45 Cone, 1.15"–1.80" (29.21 - 45.72mm)
101-0243-00 Cone, 1.70"–2.35" (43.18 - 59.69mm)
101-0236-05 Cone, 2.25"–2.90" (57.15 - 73.66mm)
101-0237-02 Cone, 3.35"–4.00" (85.09 - 101.6mm)
804-8664-50 Cone, 3.90"–4.55" (99.06 - 115.57mm)
Clamp Bells
109-1011-09 4.25" (107.95 mm) O.D.
101-0235-40 5.75" (146.05 mm) O.D. (2 included)
Van Norman 8. 888-855-1789
To Next Page
Loading...