204 Heavy Duty Combination Brake Lathe
SPINDLE CLAMP ASSEMBLY
Item Part No. Description Qty.
1 804-2040-26 Push Rod 1
2 804-8035-81 Retaining Ring 1
3 804-1243-55 Compression Spring 1
4 000-1155-33 Washer, 3/8 Flat 1
5 804-2040-63 Sleeve 1
6 000-1180-28 Lockwasher, (5/16) 3
7 000-0167-64 SHCS (5/16-18 x 1/2) 3
8 804-1247-55 Retaining Ring (5000-112) 1
9 804-8073-76 Wing Nut (5/16-18 1
10 804-2040-27 Release Dog Assembly 1
11 804-2042-97 Bearing Housing 1
12 804-1176-62 SSS (3/8-16 x 1/2) 1
13 804-2041-51 Shaft 1
14 000-1150-10 Washer, 1/4 Flat 3
15 000-0100-57 HHCS (1/4-20 x 1) 3
16 804-2042-98 Cover 1
17 804-8641-77 Bearing Locknut 1
18 804-1405-72 Thrust Washer 1
19 804-1243-45 Roller Bearing 1
20 800-1408-51 Thumb Screw (3/8-16 x 3/4) 1
21 800-8016-56 Grease Fitting 1
22 804-1415-69 Oil Seal 1
23 000-0102-86 HHCS (5/16-18 x 3/4) 4
24 000-1160-17 Washer, 5/16 Flat 4
25 804-2040-72 Rear Bearing 1
26 804-2040-70 Spindle Worm Gear 1
27 804-2040-69 Work Spindle Sleeve 1
28 804-2040-23 Feed Screw 1
29 804-2040-62 Guard 1
30 804-1162-07 O-Ring 1
31 804-2040-24 Feed Screw Nut & Gear 1
Van Norman 24. 888-855-1789
To Next Page
Loading...