204 Heavy Duty Combination Brake Lathe
STANDARD & OPTIONAL EQUIPMENT (continued)
Miscellaneous
Part No. Description
804-2059-20 Chip Tray
108-1061-00 Vented Silencer-Rotor
109-1032-09 Spacer, 1 x 1.5 x 1.5
804-8665-41 Solid Rotor Silencer, Magnetic Band, .250" x 48" (6.35 x 1219.2 mm)
101-0230-10 Automotive Drum Silencer
000-0600-70 Hex Key .187" (4.75 mm)
000-0600-54 Hex Key .125" (3.18 mm)
000-0600-20 Hex Key .312" (7.93 mm)
800-1017-39 Hex Key .375" (9.53 mm)
804-8664-43 Wrench, Draw Bolt
804-7803-35 Wrench, Arbor Nut
OPTIONAL ACCESSORIES
Arbors
804-2049-41 11/16" Arbor with Nut, Cone & Washer, Bore .875"–1.250"
(22.23 - 31.75 mm) 7.375" Long
804-2040-42 1" Arbor with Nut/Washer 9.75" L
804-8666-09 1 7/8" Arbor with Nut & Washer (for Ammco Adapters) 15.75" Long
804-2040-90 2" Arbor with Nut/Washer, 15.75" L
804-8677-10 Extended 2" Arbor with Nut & Washer, 19.88" Long
Double Ended Cones used for larger hubbed Drums & Rotors
804-8665-15 Cone, 2.82" x 3.18" (73.41–82.80mm)
804-866516 Cone, 3.20" x 3.56" (82.80–91.95mm)
804-8664-65 Light Truck Set for 1" Arbor
Bore Range 3.90"–5.65" (99.06-143.51mm) for Hubless Drums/Discs
804-8664-50 Cone, 3.90"–4.55" (99.06–115.5mm)
804-8664-50 Cone, 3.90"–4.55" (99.06–115.5mm)
804-8664-51 Cone, 4.45"–5.10" (113–129.54mm)
101-0639-00 Cone, 5.00"–5.65" (127"–143.51mm)
000-1806-70 Spring
804-2053-01 Clamp Bell, 6.25" (158.75mm)
804-2053-00 Clamp Bell, 7.75" (196.85mm)
804-8659-59 Hubless Adapter Set, Small Size for 1" Arbor, Bore Range
1.87"–3.00" (47.5 - 76.2 mm) LH
804-8659-60 Rotor Locator LH
804-8659-61 Cone, 1.875" x 3.125” (47.63 x 79.38mm)
804-8659-62 Spacer LH
804-8659-63 Locator Nut LH
102-0925-00 Wrench, Spanner
Van Norman 9. 888-855-1789
To Next Page
Loading...