Vanderbilt ACT365-ACU - 3 Wiring; 3.1 Typical wiring of ACT365-ACU

3 Wiring
This sections describes the following.
3.1 Typical wiring of ACT365-ACU 11
3.1.1 Wiring exit readers 12
3.2 Fire override configuration 12
3.3 Interlock/airlock configuration 12
3.4 Intruder panel wiring 13
3.1 Typical wiring of ACT365-ACU
Label Description Label Description
A Door contact, normally closed E Ethernet: RJ45
Note: All IP device must have a valid IP Address.
B Push to exit, normally open F Important: Place varistor across all lock terminals.
Note: Diagram shows normally energised Magnetic
Lock.
C Break glass monitoring, normally
closed
G Break glass unit (double pole)
© Vanderbilt 2019 11 A-100521-c
15.03.2019