Vanderbilt ACT365-ACU - 1.1.2 Relay load; 1.2 Ordering details

ACT365-ACU ACT365-ACU2A ACT365-ACUPoE
PoE 802.3af input (PoE) N/A N/A 13.8V at 0.3A output + 0.5A battery
charge
Battery charging N/A Yes Yes
Standby Battery N/A 12V 7Ah Battery 12V 7Ah Battery
Battery Deep Discharge
Protection
N/A No Yes
Input: Voltage Rated N/A 100–240V AC N/A
Input: Voltage Operating N/A 90–264V AC N/A
Input: Frequency N/A 50–60Hz N/A
Input: Max Current N/A 1.0A (@ 90V AC) N/A
Input: Mains input fuse N/A T2.0A N/A
Input: Max standby power N/A 0.5W (no load and no
battery connected)
N/A
Output: Voltage N/A 13.4–14.2V DC
(13.8V DC Nominal)
on mains power
10.0–12.3V DC on
battery standby
N/A
Output: Max load current N/A 2.0A N/A
Output: Ripple N/A 150mA pk–pk max N/A
Output: Load output fuse N/A F2.0A N/A
Output: Overload N/A Electronic shutdown
until overload or short
circuit removed
(Under mains power
only)
N/A
1.1.2 Relay load
When used with inductive loads (Maglock/Strike locks) the following ratings apply.
ACT365-ACU ACT365-ACU2A ACT365-ACUPoE
Main relay 1.5A @ 30VDC /
1.5A @ 50VAC
1.5A @ 30VDC /
1.5A @ 50VAC
1.5A @ 30VDC /
1.5A @ 50VAC
Aux relay 400mA @ 30VDC 400mA @ 30VDC 400mA @ 30VDC
1.2 Ordering details
ACT365-ACU V54502-C130-A100 Single door cloud IP controller
ACT365-ACU / ACT365-ACU2A / ACT365-ACUPoE – Installation Instructions Overview
© Vanderbilt 2019 5 A-100521-c
15.03.2019