Vantrue N1 PRO User Manual

After powering on, one press the power button to enter the setup
menus.(If the camera is recording video, press the OK button to stop
the recording and then press the Power button.)
4.2. Settings in the menu
Record Setup
- 10 -
A. Manually
Long press the Power button to turn on/off the camera.
4. Basic Operation
4.1. Power on/off the camera.
B. Automatically.
When connecting to car charger, the camera will auto turn on
after you start your car and the battery charging starts. It will auto
turn off in 5 seconds after you shut off the car.

Vantrue N1 PRO Specifications

General

Resolution	1920x1080P
G-Sensor	Yes
Loop Recording	Yes
Parking Mode	Yes
Frame Rate	30fps
Aperture	F1.8
Night Vision	Yes
Screen Size	1.5 inches
Storage	Supports up to 256GB microSD card
Operating Temperature	-4°F - 158°F (-20°C - 70°C)
Lens	6-Layer Optical Glass Lens
Viewing Angle	160°
GPS	Yes (external GPS module)