utomatic (Magnetic)
safety cut-off system.
Power is cut-off once
hopper is removed.
3.3 Hopper
The VS6 hopper features a automatic
(magnetic) power cut-off safety system.
When the hopper is removed from the grinder
chamber thread, the sensor will cut-off power
to the motor, this precaution ensures your
safety while disassembling the grinder.
We recommend that you always disconnect
the power supply plug during disassembly of
the grinder hopper and burr chamber.
SAFETY FEATURE: The grinder will
automatically power off after 30 seconds of
completing a grind cycle, if sensors detect
NO COFFEE in the grind chamber.
11
To Next Page
Loading...
