Varia VS6 - Hopper Finger Guard + Single Dose Feed

USER MANUAL
3.4 Hopper Finger Guard + Single Dose Feed
The VS6 is equipped with a removable lid and a
single dose feed collar for added convenience.
To assemble, carefully push the single dose feed
collar onto the hopper, align to magnets. In high-
volume environments, the single dose feed collar
can be used independently without the top lid for
efficient operation.
Carefully push
the single dose
feed collar
onto the hopper
(magnetic).
Must be fitted
before use.
Hopper lid
(magnetic)
Hopper
The single dose feed
collar MUST BE SECURELY
ATTACHED to the hopper
before powering on or
operating the VS6.
12
NEVER ALLOW fingers, long
hair or loose clothing to enter
the hopper when the motor is
running or when the power
supply is plugged in.
DANGER!
!
DANGER!
!