The Varia VS6 is the latest entry to the
commercial/prosumer space of grinders.
VS6 features a revolutionary new internal
assembly that allows for interchangeability
between a 58mm flat burr to a 63mm
conical burr set within seconds and with
no calibration needed. (Conical burr set
purchased separately).
The VS6 uses a 300W brushless AC motor
system with planetary gearbox and
Variable RPM control from 500-1600RPM.
The VS6 also features active static
ionization needles to reduce static and a
removable dosing chute.
In addition, the VS6 features increased
capacity to 60-80 grams and is still a
zero retention-focused grinder with our
76.5-degree sloped architecture.
03
To Next Page
Loading...
