Varytec Blitz Bar 240 - Operating; Starting the Device; Main Menu

7 Operating
7.1 Starting the device
1. Connect the device to the power grid. The device is immediately operational.
2. The set values are retained during a power supply interruption.
7.2 Main menu
1.
Press to activate the main menu.
2.
Press or to select a menu item.
3.
Press to conrm the selection.
4.
Use or to change the respectively displayed value.
5.
When the display shows the desired value, conrm with .
6.
To exit a menu item without making changes, press .
All previously made settings are retained even when you disconnect the device from the
power grid.
Operating
Blitz Bar 240
23
Stroboscope