Varytec Blitz Bar 240 - Auto Operation

7.2.3 Auto operation
Auto mode can only be activated when the unit is operating in stand alone mode or as master
in a master / slave combination. This setting is only relevant if the device is not controlled via a
DMX controller. In auto mode, 20 dierent show programmes are available, which run with
adjustable speed.
1.
Press to activate the main menu.
2.
Press or until the display shows ‘Mode’ and conrm with .
3.
Press or until the display shows ‘Auto’ and conrm with .
4.
Use or to select the desired show programme ( ‘Pro 00’ … ‘Pro 20’ ) and conrm with
.
ð
The display shows ‘SP’ .
5.
Use or to set the running speed of the programme in a range from ‘Sp 01’ (slow) …
‘Sp 99’ (fast) and conrm with .
Operating
26
Blitz Bar 240
Stroboscope