Varytec Blitz Bar 240 - DMX Address

7.2.1 DMX address
This setting is only relevant if the device is controlled via a DMX controller.
1.
Press to activate the main menu.
2.
Press or until the display shows ‘Dmx Address’ and conrm with .
3.
Use or to select a value between ‘A000’ and ‘A512’ for the desired DMX address.
Make sure that this number matches the conguration of your DMX controller. The fol‐
lowing table shows the respective highest possible DMX address for the various DMX
modes.
Mode Highest possible DMX address
8-channel mode 505
14-channel mode 499
232-channel mode 281
4.
When the display shows the desired value, conrm with .
Operating
24
Blitz Bar 240
Stroboscope