1. General and Regulatory Information
EzRay Air (Model: VEX-P300) User Manual 1
1. General and Regulatory Information
1.1 Manufacturer's Liability
The manufacturers and/or retailers of this equipment assume responsibility for the safe
and normal operation of this equipment only when:
▪ Always use genuine VATECH approved equipment and parts.
▪ Perform all maintenance and repairs at a VATECH authorized distributor.
▪ Using this equipment properly according to the user manual.
▪ The equipment damage or malfunction is not the result of an error on the part of
the owner or operator.
Disclaimer:
EzRay Air is sold with the understanding that the user assumes sole
responsibility for radiation safety (as well as any state, provincial, or
local regulatory compliance) and that VATECH, its agents or
representatives, do not accept responsibility for:
1) any injury or danger to personnel from X-ray exposure,
2) image over/underexposure due to poor operating techniques or
procedures,
3) equipment which has been damaged, modified, or tampered with
in any way.
1.2 Owner and Operator's Obligations
▪ The owner of this equipment must perform constancy tests at regular intervals
Eto ensure patient and operator safety. These tests must be performed in
accordance with local X-ray safety regulations.
▪ The owner of this equipment must perform regular inspection and maintenance of
the mechanical and electrical components in this equipment to ensure safe and
consistent operation (IEC 60601-1).
▪ The owner of this equipment must ensure inspection and cleaning work is
performed in accordance with the maintenance schedule outlined in Chapter 7
Cleaning and Maintenance.
DO NOT operate this equipment until reading this manual and reviewed
the related materials.
To Next Page
Loading...
Need help?
General
