4. Operation
36 EzRay Air W (Model: VEX-S300W) User Manual
4.4 Exposure
The operator MUST instruct the patient to refrain from moving during
the entire exposure.
1. Instruct the patient not to move.
2. Press and hold the Remote Exposure Switch for exposure duration. The Remote
Exposure Switch allows the operator to control image acquisition from outside of the
X-ray room. Pressing the Remote Exposure Switch activates the X-ray Exposure
Indicator to turn yellow. This color indicates that the X-ray is being emitted.
Press and hold the Remote Exposure Switch as long as the
acoustic signal can be heard. Otherwise the exposure will be faulty
and there will be an error message on the Control Panel.
Remote Exposure Switch
X-ray Exposure Indicator
Green: Ready
Yellow: X-ray ON
To Next Page
