1. Imaging System Overview
10 Green X (PHT-75CHS) User Manual
1.6.3 Exposure Switch
The Exposure Switch allows the operator to control image acquisition from outside of
the X-ray room.
Press and hold the Exposure Switch down until acquisition is completed. Premature
release of the Exposure Switch will abort image acquisition.
Pressing the Exposure Switch activates the LED indicator to turn yellow. This color
indicates that the X-ray is being emitted.
The Exposure Switch is detachable. Ensure the Exposure
Switch cable is not detached from the unit accidentally
during the operation.
Keep vocal/visual contact with the patient during exposure. If
any problem occurs during exposure, release the Exposure
Switch immediately.
To Next Page
