2
IMPORTANT SAFEGUARDS
WARNING: This product can expose you to chemicals known by the State of California to cause cancer
and birth defects or other reproductive harm. Wash hands after handling.
SAFETY WARNINGS FOR WALL SENSORS
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious personal injury.
DO NOT TAKE ANY ACTION THAT COULD BE DANGEROUS IF THE WALL CONTAINS A LIVE
ELECTRICAL WIRE, GAS OR WATER PIPE. Once object is detected, always turn off the
electrical power, gas and water supplies before drilling hole or driving nail/screw into the
wall. Failure to follow these instructions may result in electrical shock, fire and/or serious
injury.
Do not rely exclusively on the detector to locate items behind the scanned surface. Use other
information sources to help locate items before penetrating the surface. Such additional sources include
construction plans, visible points of entry of pipes and wiring into walls, such as in a basement, and in
standard 16 in. (406 mm) or 24 in. (610 mm) stud spacing practices.
Do not use on a ladder or unstable support. Stable footing on a solid surface enables better control
of the tool in unexpected situations.
Do not disassemble. Have your product serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the product is maintained.
Do not attempt to modify this product or create accessories not recommended for use with
this product. Any such alteration or modification is misuse and could result in a hazardous condition
leading to possible serious personal injury.
Maintain labels and nameplates on the housing. These carry important information.
SERVICE
When servicing the product, use only identical replacement parts. Follow instructions in
the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance
instructions may create a risk of shock or injury.
To Next Page
Loading...