Vax DualPower Pro Advance W85-PL-T-E - Using the Hose and SpinScrub Tool

10
Using the hose and SpinScrub Tool
!
CAUTION
!
Test for colourfastness - Wet a white absorbent cloth with the solution. In a small hidden area of your carpet/rugs/upholstery gently rub with the dampened cloth.
Waittenminutes and check for colour removal or bleed with a white paper towel or cloth. If your carpet has more than one colour, check all colours.
1
Pour required
amount of cleaning
solution into the
clean water/solution
tank.
6
Slide SpinScrub tool over tab at end of hose until it
clicks into place. 7
Plug into mains,
pressthe On/O
button to switch on.
8
Press trigger on hose
to release solution/
water.
9
Squeeze trigger
on the forward
stroke, release
trigger on backward
stroke to recover
solution/ water.
2
Fill the clean water/
solution tank
with warm water
(max40’C).
3
Turn wash/rinse
dialto ‘wash’. 4
Pull down accessory
hose connector
cover.
5
Push hose end
and hose solution
connector into
hose and solution
connection port.