Vax DualPower Pro Advance W85-PL-T-E - Page 13

13
Changing the brushbar - continued
7
Pull and slide right side brushes together with brushbar.
Removeside cap from brushbar and unloop brushbar from belt.
9
Line up the ‘right’ side brushes with base and slide
into place. Attach brushbar to side brushes. 10
Attach the other side of brushbar to side brushes.
Slideontoside of base and into place.
11
Ret belt guard and tighten x2 screws. Ret and tighten
screwsx2 on either side of side brushes. Ret SpinScrub
brushes. Ret the rugguards and tighten screws.
8
Loop replacement brushbar through belt and onto belt grip.