7
8 9
Hose attachments
While depressing the blue solution spray
trigger, pull the attachment in a downward
motion. Release the trigger and push the
attachment forward in the same path to
remove dirty water and solution from
upholstery. For heavily soiled areas, repeat if
necessary. To rinse, remember to turn the
soap switch to the OFF position and repeat
process.
Note: Make sure upholstery is thoroughly
dry before using.
Remove the hose from the fitting by
twisting it counterclockwise to
unlock. Close the hose attachment
cover until it snaps into place.
Disconnect water supply connector
from the water supply port by
pressing the grey button and
pulling.
18
19
10
11
Move the tool/floor selector to the
floor position (upw
ard).
Return tools to their storage
position on the back of the cleaner.
V027(Y) User Guide 5/10/06 11:47 am Page 9
To Next Page
Loading...
Need help?
General
