Hard floor cleaning
20
21
Before assembling the accessories
for hard floor cleaning, ensure that
the cleaning solution soap tank is
filled with Multi hard floor solution.
Please refer to the bottle for
measuring quanitites.
Do not use Vax AAA carpet cleaner.
N.B The Hydrodry head should only
be used on sealed hard floors. If in
doubt, consult the floor
ing
manufacturer.
W
rap the solution tube around the
hose and secure into place using
the clips provided.
Attach one end of the solution tube
into the hose water supply port at the
side of the machine. Press firmly into it
locks into place
Attach the other end of the solution
tube into the Hydrodry hard floor wash
head.
Move the floor/tools selector to the
tools (upw
ard) position.
Caution: DO NOT turn the soap
switch ON without solution in the
tank. DO NOT allow the solution
tank to run dry.
To wash hard floors, turn main
power and soap switch to the “ON”
position.
On the Hydrodry hard floor wash
head ensure that the rocker switch is
pushed down towards the back of the
head to allow water and solution to
reach the floor
T
o wash hard floors, move the wash
head, slowly and in even motions, over
the area to be cleaned.
To suck up excess water and dry hard
floors
, the roc
ker switch should be
pushed forward. This prevents water and
solution flow from the clean water tank.
A
B
1
2 3
4
5
6
V027(Y) User Guide 5/10/06 11:47 am Page 10
To Next Page
Loading...
Need help?
General
