90
GB
C4DS
10.2 TIMER/COUNTDOWN programming
While the STOPWATCH does not need any further presetting, for the TIMER and COUNT-
DOWN functions the time windows have to be programmed in the first place
a c “TRIPDISTANCE / SETTINGS
a c “TIMING / SELECT”
a c “TIMING / ?SET?”
a “TIMER 1” or “TIMER 2” or „COUNTDOWN“
c accept / select
<<flashing numbers>> are ready to be set
a c hours a c minutes a c seconds
c „?SET OK?“ accept
“TIMER1/TIMER2/COUNTDOWN SET DONE” appears briefly and your VDO-Computer
automatically returns to main menu TRIPDISTANCE/SETTINGS.
To Next Page
Loading...
