VDO Cyclecomputing M6

Questions and Answers

K
Kathryn SchroederAug 2, 2025
Why is no speed displayed on my VDO Cyclecomputing Bicycle Accessories?
- W
  Willie HopkinsAug 2, 2025
  If your VDO Cyclecomputing Bicycle Accessories device isn't showing speed, there might be a few reasons: 1. The wheel circumference might not be correctly set or is at zero. In this case, set the wheel circumference. 2. The battery in the transmitter might be dead. If that's the case, replace the battery in the transmitter. 3. The distance from sensor to magnet might be too great, or the magnet isn't aligned correctly with the sensor. Correct the sensor and magnet positions. 4. The computer isn't properly clicked into the handlebar bracket. Insert the computer into the handlebar bracket and rotate it as far as possible until it clicks.
J
Jorge ChavezAug 7, 2025
What to do if no heart rate is displayed on VDO Cyclecomputing Bicycle Accessories?
- C
  Chad MartinezAug 7, 2025
  If your VDO Cyclecomputing Bicycle Accessories device isn't displaying heart rate, here are a few potential causes: * The heart rate sensor may not have been selected. Select the heart rate sensor from the sensor selection area. * The heart rate sensor may not have been paired. Activate the heart rate sensor, correctly position the heart rate chest belt on your body, and insert the computer into the handlebar bracket. The heart rate symbol should flash to indicate pairing. * The battery in the heart rate chest belt may be dead. Replace the battery in the heart rate chest belt.
D
Danielle PetersAug 13, 2025
Why is no cadence displayed on my VDO Cyclecomputing M6 Bicycle Accessories?
- R
  Richard RamirezAug 13, 2025
  If your VDO Cyclecomputing Bicycle Accessories device isn't displaying cadence, here are a few things to check: * The cadence sensor may not have been paired. Activate the cadence sensor and insert the computer into the handlebar bracket. The cadence symbol should flash to indicate pairing. * The battery in the cadence transmitter may be dead. Replace the battery in the cadence transmitter.
C
Crystal CarsonAug 19, 2025
How to fix a weak display on VDO Cyclecomputing Bicycle Accessories?
- M
  melissa30Aug 19, 2025
  If the display on your VDO Cyclecomputing Bicycle Accessories is weak, the battery may be dead. Check the battery and replace it if necessary.
D
Dr. Julie DelgadoAug 26, 2025
What to do if VDO Cyclecomputing Bicycle Accessories display shows half segments?
- A
  Antonio MillerAug 26, 2025
  If you're seeing half segments on the display of your VDO Cyclecomputing Bicycle Accessories, especially after a battery change, it could be that the computer software isn't running correctly. Try removing and re-inserting the battery.

Summary

VDO M6 Buttons

VDO M6 Functions

Accessing Total Values

Handlebar Bracket Installation

Speed Transmitter Installation

Computer Mounting

Transmitter Pairing and Testing

Dimension and Unit Settings

Wheel Circumference Setup

Personal Data Settings (My Data)

Sensor Selection

Heart Rate Intensity Zones

Start Altitude Settings

Current Altitude Settings

Altitude Recalibration

Total Values Management

Setting Total Distance

Setting Total Ride Time

Resetting Total Values

Navigator Setup

Resetting Navigator to Zero

Trip Section Counter Operation

Trip Data Management

Saving Trip Data

Activating Heart Rate Option

Heart Rate Display and Buttons

Heart Rate Functions

Heart Rate Training Zones

Activating Cadence Option

Cadence Display and Function

Display with Combined HR and Cadence

Replacing Computer Battery

Replacing Speed Transmitter Battery

Troubleshooting Guide

VDO Cyclecomputing M6 Specifications

General

Current Speed	Yes
Average Speed	Yes
Maximum Speed	Yes
Trip Distance	Yes
Total Distance	Yes
Ride Time	Yes
Clock	Yes
Display	LCD
Mounting	Handlebar mount
Power Source	Battery
Water Resistance	Yes